6.7 CAB & CHASSIS 2007-2010.5 INJECTOR REPLACEMENT KIT – REFURBISHED

Everything you need to properly install injectors in your 2007-2010.5 6.7 Cummins.

Complete Kit – $1,649.99

The kit includes:

• Full set of Refurbished 6.7 2007-2010.5 Cab & Chassis Injectors
• Cummins 5.9/6.7 High Pressure Fuel Connector Tubes
• Cummins 6.7 High Pressure Fuel Lines
• Cummins 5.9/6.7 Valve Cover Gasket

6.7 2007-2010.5 Ram Cab & Chassis

InjectorsDirect.com REFURBISHED INJECTORS

These are Refurbished & tested 6.7 injectors, that were removed from a running engine. They are cleaned externally in an ultrasonic tank, flushed internally, and the nozzles are reconditioned. Each injector is Individually tested on a state of the art test stand to ensure that they meet OEM specifications. Each test includes a resistance test, system leak test, purge, idle speed test, mid load test, full load test, and static back leak test. Each test cycle checks solenoid response time, back leak flow, and fuel delivery. Guaranteed to be within factory specification.

Replaces part numbers:

BOSCH®: 0 986 435 519, 0 445 120 071, 0 445 120 184, 0 445 120 204

Mopar: R8310747AA, R8002012AB, R8002012AC, R8002012AD, R8310747AA

Cummins: 4940096, 4981077, 5253221

They carry a one-year warranty. Information about warranty policies can be found HERE.

Each injector includes all hardware necessary for installation (O-rings, copper crush washers). In order to complete the installation of your new injectors, we recommend replacing the fuel crossover tubes & valve cover gasket which can be found HERE and HERE.

CUMMINS 5.9/6.7 HIGH PRESSURE FUEL CONNECTOR TUBES

Brand new BOSCH® connector tube with o-ring. We recommend these be changed when replacing your injectors. Re-using old tubes can lead to leaks, contamination, and premature injector failure.

Replaces part numbers:

Mopar: 5086874AB, 5175565AA

Cummins: 3979419

BOSCH®: F 00R J01 572

CUMMINS 6.7 HIGH PRESSURE FUEL LINES

Brand new set of high pressure fuel lines. Replacing the fuel lines helps prevent premature injector failure. To prevent line failures, Injection lines for cylinders 2 – 6 incorporate the
updated isolators. An isolator is not used on the first cylinder.

Replaces part numbers:

Cummins: 4935974 (x2), 4935976, 4935981, 4935982 (x2)

CUMMINS 5.9/6.7 2006+ VALVE COVER GASKET KIT

Fits Cummins 5.9 2006-2007 & 6.7 2007-Current

(Not compatible with 2003-2005)

Mopar Part # 5179091AC

Kit includes gasket with injector connectors which plugs directly into the factory harnesses. We recommend these be replaced when installing new injectors to avoid leaks & shorts in the injector harness.